The offset seems not linear.ĭo you know how can I solve this problem? Maybe the software or myself is not pointing at the correct temperature sensor or source.Įdit: I have restarted my system and now I notice new temperatures sources (I think I did not noticed them)Ĭore (Tctl/Tdie) the one I selected which is too high) (I have the same problem with Dragon Center and OpenHardwareMonitor). When on AMD Master the CPU temp is at 35-36☌, fan control is showing 46-47☌. One question from my side, I have an offset on the CPU temperature between Fancontrol and AMD Ryzen Master. They will return to 0% if the temperature is 65 C or less.What a great tool I was looking for! I was using Dragon Center but too buggy and to try doing the configuration from the bios is not confortable as I had to go back to windows to check the fans and temps behaviors.

For example, in my curves, the fans will always spin at 100% speed if the temperature is 95 C. When the minimum or maximum temperature is reached for both of these cards, their corresponding speed will trigger.

Next, you need to set a minimum speed and a maximum speed. Basically, you're telling the app, 'I want my temperature to never exceed X, but it's okay if it never goes below Y.' Both cards require you to set a minimum and a maximum temperature. First, let's focus on the Target and Linear cards since they're very similar to each other. I've already configured these cards to my personal preference. For case fans, you can use the hottest motherboard, CPU, or GPU sensor as it doesn't matter too much. Before you do anything, you need to select a temperature source.įor CPU fans, use one of your CPUrelated sensors (pick the one with the highest temperature to be safe).

For ios download FanControl v160